Inhaltsverzeichnis
Werbung
• C-PLUG plugged in at runtime.
• RMON rising alarm occurred.
• RMON falling alarm occurred.
• Ring redundancy enabled.
• Ring redundancy disabled.
• (R)STP protocol enabled.
• (R)STP protocol disabled.
• Disabled (R)STP because ring redundancy is enabled.
• DIP settings taken from C-PLUG.
RM=<ON|OFF>, STBY=<ON|OFF>, R1=<ON|OFF>, R2=<ON|OFF>
• (R)STP topology change detected while (R)STP is off. Aging time will be reduced to <Zeit in
s> sec for at least <Zeit in s> sec.
• Set aging time back to original value <Zeit in s> sec.
• No connection to SNTP server. Server IP address <IP-Adresse>.
• Connected to SNTP server. Server IP address <IP-Adresse>.
• Enabled link status monitoring on ring ports.
• Changed port VLAN ID of the ring ports to 1.
• Disabled GVRP because ring redundancy is enabled.
• Disabled GMRP because ring redundancy is enabled.
• Disabled mirroring because monitor port is ring port.
• (Re)enabled ring ports (because disabled by user).
• Disabled port lock on ring ports.
• Warning: ring ports have different static VLAN configuration.
• Warning: ring ports have different VLAN port configuration.
• Warning: ring ports have different static multicast configuration.
• Warning: ring ports have different load limits configuration.
• Enter fault state: port <Portnummer> enabled for link status monitoring and link down.
• Leave fault state: port <Portnummer> disabled for link status monitoring.
• Enter fault state: power line <ID der Spannungsversorgung> enabled for power monitoring
and power down.
• Leave fault state: power line <ID der Spannungsversorgung> disabled for power monitoring.
• <CLI | WBM | SSH>: Authentication failure.
• Warning: OSPF consumed too much memory and is shut down.
• Duplicate IP address <IP-Adresse> sent from <MAC-Adresse>
• IN <Nummer des digitale Eingangs> (<Name des Eingangs>) <high | low>
SCALANCE X-300 / X-400
Projektierungshandbuch, 03/2022, C79000-G8900-C187-33
D.1 Fehlermeldungen des SCALANCE X300 / X400
Anhang D
407
Werbung
Inhaltsverzeichnis
