Adjusting The Receiver Volume; Redial Facility; Keypad Lock - AUDIOLINE STUDIO 80-B Bedienungsanleitung

4.10

Adjusting the receiver volume

If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can adjust the volume during a call by means of the
volume will be shown in the display with the message EAR VOL 1 to 5.
4.11

Redial facility

You can use the redial facility if the person called is engaged or does not reply. Your telephone
remembers the last five numbers dialled.
/
P
4. Press the
5. Further redial numbers can now be selected using the
page back through the list.
6. Now press the call button
dialled.
Note: If the redial number is stored in the phone book, the name will automatically appear in the
display instead of the phone number.
Deleting redial numbers
To delete an individual number from the redial list, proceed as follows:
/
P
1. Press the
and buttons.
/
C
2. Press the
3. Confirm with the menu button
list.
Deleting all redial numbers
To delete all numbers from the redial list, proceed as follows:
/
P
1. Press the
/
C
2. Hold the button pressed until DELETE ALL? appears in the display.
3. Confirm with the menu button
list.
4.12

Keypad lock

If you frequently carry the handset with you, you can lock the keypad so that buttons are not
pressed unintentionally. Incoming calls can be received as normal when the keypad lock is
switched on.
Activating the keypad lock
Press the button on the handset for three seconds. The
display.
Deactivating the keypad lock
To deactivate the keypad lock, press the
Note: The keypad lock can also be activated via the menu.
button and the last phone number dialled will be shown in the display.
and the telephone number displayed will be automatically
button and select the redial number that is to be deleted by means of the
button and the display will show DELETE?.
/
button.
/
- Operation -
and the telephone number will be deleted from the redial
and the telephone number will be deleted from the redial
button twice.
and buttons. The selected
button. The
symbol will appear in the
button is used to
49