Kärcher KM 120/250 R D Bedienungsanleitung Seite 29

Replacing fuses
1 Lock nut
2 Cover fuse box
 Unscrew the knurled nut.
 Open the cover on the fuse box.
 Check the fuses.
 Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
Note: The fuse FU 01 is located in the en-
gine compartment.
FU 01* Main fuse
FU 02 Horn
FU 03 Safety relay
Multifunction display
FU 04 Beacon lamp
FU 05 Safety relay
Time delay
FU 06 Driver cabin (optional)
Wiper
FU 07 Fuel pump
FU 08 Starter
FU 09 Left lighting
FU 10 Right lighting
FU 11 Working light
FU 12 Vibrator system
Suction blower
FU 13 Backup signal
* These fuses may only be changed by
Customer Service, as it is necessary to
check the device for potential faults.
60 A
25 A
10 A
5 A
25 A
10 A
10 A
3 A
7.5 A
7.5 A
10 A
25 A
5 A
12
-
EN 29