Trouble Shooting - Beyerdynamic TG 100 Handheld Set Bedienungsanleitung

30
4.

Trouble Shooting

TG 100R diversity receiver
Problem
No function
No reception
(left LED does not
illuminate)
Distorted sound
Left LED illuminates
permanently red
Left LED is flashing
green
Possible cause
• Power supply is interrupted.
Power supply unit is not
connected to the mains
and/or to the receiver.
• Transmitter is not switched
on.
• Transmitter works on a
different frequency.
• Receiving antennae are not
positioned correctly.
• Out or range; distance
between transmitter and
receiver is too far.
• Input amplifier of the
connected mixer is over-
loaded.
• Input sensitivity is too high.
• Battery of the transmitter is
too weak.
• Disturbed channel.
TG 100 – Trouble Shooting
Solution
• Connect the power supply
unit to the mains and/or to
the receiver.
• Switch on the transmitter.
• Make sure that the trans-
mitter and receiver are on
the same frequency.
• Extend the antennae
completely and set them at
an angle (approx. 60°) in
the shape of a "V".
• Reduce the distance
between transmitter and
receiver
• Use the reduction of the
mixer or adjust the
volume .
• Reduce the sensitivity, i.e.
set the gain switch of the
transmitter to "Low".
• Replace the battery or
recharge the rechargeable
battery.
• Select another frequency
(channel) for the receiver
and transmitter.