Cleaning; Cleaning The Appliance - Silvercrest SLE 200 B2 Bedienungsanleitung

Cleaning

Cleaning the appliance

CAUTION! PROPERTY DAMAGE!
Possible damage to the appliance.
► Do not allow any liquids or moisture to get into the appliance.
► To avoid irreparable damage to the appliance, never immerse it in water.
► Always remove the mains plug w from the mains power socket before
cleaning the appliance.
► Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
► Do not clean the water tank 4 in the dishwasher. Otherwise, it will be
damaged.
♦ If required, wipe the casing with a slightly damp cloth.
♦ Remove the water tank 4 and pour the water into a sink. Dry the water
tank 4 well inside and outside before replacing it in the appliance.
♦ We recommend cleaning the water tank 4 regularly (every two weeks) to
prevent mould and bacteria. Fill the water tank 4 with lukewarm water and
add a commercially available detergent. Rinse repeatedly with lukewarm
water. We also recommend disinfection following cleaning. To do this, use
a standard commercial, alcohol-based disinfecting agent or high-proof
alcohol. Both substances are completely harmless if rinsed repeatedly with
lukewarm water afterwards.
♦ Remove any accumulations of dust on the air inlet grille 2 and the air outlet
grille 8 with a paintbrush, soft brush or a vacuum cleaner.
■ 18 │ GB │ IE SLE 200 B2