Operation - Husqvarna AUTOMOWER 105 Bedienungsanweisung

capacity. It is also an ideal tool to control
which periods the product should not
mow, for example when children are
playing on the lawn.
Cutting height
Applicable for Automower
440/450X
The cutting height can be varied from MIN
(1) to MAX (9). During the first week after
a new installation, the cutting height must
be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be
lowered one step every week until the
desired cutting height has been reached.
Security
In this menu, settings relating to security
and the connection between the product
and the charging station can be made.
There are 3 security levels to choose
Low , Medium , High .
from:
Messages
Applicable for Automower
305/310/315/315X/420/430X/440/450X
Historical fault and information messages
can be read in this menu. For some of the
most common fault messages, there are
tips and advice to help you rectify the
fault.
Weather timer
Applicable for Automower
420/430X/440/450X
This function allows the product to
automatically adjust its mowing times
34.1 To switch on, stop and switch off
the product
• The product can only start if it is switched on and
the correct PIN code has been entered. To switch
®
on the Automower 305, push the ON/OFF button
for 3 seconds and check that the indicator lamp is
lit. To switch on all other models, set the main
1 .
switch to
• To stop to product, push the STOP button on top
of the product. The product stops and the cutting
motor stops.
1418 - 008 - 22.12.2020
®
420/430X/
®
®
305/315/315X/

34 Operation

• To switch off Automower
button for 3 seconds and check that the indicator
lamp is not lit. To switch off all other models, the
main switch is set to
34.2 Operating mode Automower
Push the Operation selection button 1-3 times to select
an operating mode. You can select between 3 different
operating modes.
• HOME . Sends the product to the charging station.
It remains here until another operation mode is
based on how much the lawn grows.
When the weather is good for grass
growth, the product mows more often and
when grass growth is low the product
automatically spends less time on the
lawn.
Installation
This menu function is used to customize
the installation. For many work areas
there is no need to alter the factory
settings, but depending on the lawn
complexity the mowing result can be
improved by making manual settings.
Settings
This selection allows you to make
changes to the general product settings
such as date and time. You can also
ECO mode and Spiral
switch on/off
cutting , or save your settings in different
®
Profiles (Automower 305/315/315X/
420/430X/440/450X only). Husqvarna
ECO mode be
recommends to let
switched on to save energy and avoid
interference with other equipment.
Accessories
®
Applicable for Automower
305/310/315/315X/420/430X/440/450X
This menu handles the settings for the
product accessories, for examples
®
Automower Connect or Automower
Connect@Home. Contact your local
Husqvarna representative for information
on what accessories are available for your
product.
®
305, push the ON/OFF
0 .
Operation - 103
®
®
105