Using Your Robot - Philips HomeRun 3000-Serie Bedienungsanleitung

Using your robot

Preparing for a cleaning run
2
1
Start your first cleaning program via the app
Before you start the robot on its cleaning run:
-
Attach the side brush by clicking it into the correct position on the bottom of
the robot.
-
Attach the mop pad holder to the bottom of the water tank.
-
Attach the washable mop pad to the mop pad holder.
IMPORTANT: The mop pad holder can be removed. But when using the
robot with mop pad holder, the washable mop pad must always be attached
to the mop pad holder, even if you use the robot without mopping. This is to
prevent damage to the floor and the mop holder during use.
-
Remove all cables, wires, cords and small objects such as shoes and toys from
the floor to prevent the robot from getting entangled in them.
-
Open all in-house doors.
-
Pre-wet the mop for optimal results.
Start
1 Open the app.
English
17