Philips HomeRun 3000-Serie Bedienungsanleitung Seite 13

English
16
Mode Description
Quiet The robot cleans with minimal noise. The suction power is lowered and the voice
alerts are muted.
Intensive The robot vacuums and mops the floor at the same time and at full power. This mode
is intended for thorough cleaning of small areas.
Note that it is not recommended to clean large areas in this mode. The robot passes
the area 5 times, so the cleaning time and battery usage will increase significantly.
Individual For this mode you can select all settings from scratch.
Setting Description
Suction power Change the suction power:
-
-
-
-
Mopping wetness Determine the flow rate that is pumped from the electric water tank onto the mop:
water tank.
-
-
-
-
Cleaning path Specify the number of cleaning passes. One pass is sufficient for normal cleaning. It is
repetition possible to program the robot to make 2 or 5 passes for intensive cleaning. It is
recommended to select this option only for specific cleaning areas as it impacts
cleaning duration.
Setting Description
Carpet boost Turn the carpet boost on or off. The robot automatically increases the suction power
when it has driven onto a carpet or rug. It is recommended to enable this setting.
Cleaning preferences
For each cleaning mode, you can fine-tune the following cleaning preferences:
Eco: for efficient cleaning with low energy consumption and low noise level.
Normal: for regular cleaning and effective removal of fine dust on hard floors
with optimal balance between power and efficiency.
High: for a thorough cleaning of large floors. Can clean more on a single charge
than max mode.
Max: ideal for removing large dirt like crumbs. The strong suction power removes
fine dust particles hidden deep inside carpets and crevices.
IMPORTANT: Do not add hot water or cleaning detergents to the
None: Switch off the mopping wetness for uncoated wooden floors and carpets.
Low: to mop a sensitive floor e.g. parquet. The combination of vacuuming and
mopping removes more fine dust than vacuuming alone.
Medium: optimal for a regular wet & dry cleaning. The mop removes superficial
dirt and bacteria to keep your home sanitized and healthy.
High: for a spotlessly clean home. It is recommended to combine this setting with
2 or 5 cleaning path repetitions for an intensive cleaning.
Advanced settings
For each cleaning mode, you can fine-tune the following advanced setting: