Audible Signals - Philips HomeRun 3000-Serie Bedienungsanleitung

English
12
Philips HomeRun
Settings
WLAN
Philips robot_XXXX

Audible signals

hello
Set the language of the voice alerts
Note: If the join button is not visible in the app, leave the app and go to
WiFi under 'Settings' on your mobile device. There you can select the 'Philips
robot' network and connect to it).
If the Wi-Fi pairing fails:
-
Check your Wi-Fi connection.
-
Check if you selected the correct model.
-
Check if you entered the correct Wi-Fi password.
-
Check if the robot is still in Wi-Fi set-up mode.
Note: You can recognize this if the lights in the two buttons on the robot
are still flashing orange.
Note: If you are unable to solve the problem, visit
www.philips.com/myrobot3000 for support information and the contact
details of Consumer Care.
-
The voice alert language of the robot can be changed from English to your
local language. To change the language, download the app and connect the
robot with the Wi-Fi, so that it can download the new language.
-
The app will give alerts and reminders if the robot needs attention. This way
you'll be fully informed on the real-time status even if the robot cleans while
you're away.
You can set the language of the voice alerts immediately after you have
connected the robot to Wi-Fi
1 Make sure that the robot is connected with the app.
2 In two places in the app you can find the option to change the language of
the voice alert.
-
On the same app screen where you are asked to name the robot
-
Or by pressing the three lines at the top left and then choosing the Robot
settings tab.