User Interface Signals And Their Meaning - Philips HomeRun 3000-Serie Bedienungsanleitung

User interface signals and their meaning

Signal Description of signal
The lights in the two buttons on the
robot flash slowly.
The lights in the two buttons on the
robot are on continuously.
The lights in the two buttons on the
robot flash orange.
The robot's lights go out.
The white LED on the Auto-Empty
station flashes when the robot is
charging.
Note: When the robot is fully
charged, the white LED will be on
continuously, after 10 minutes, the
white LED will dim and shine at only
30 %.
Meaning of signal
The robot is charging.
The robot is fully charged.
The robot is in Wi-Fi set-up mode.
The robot has gone into sleep mode.
The robot will go into sleep mode if it
has not returned to the station. Press
the on/off button for 3 seconds or
longer to awake the robot.Then send it
to the station via the app or by pressing
the home button.
The robot is charging when the white
LED is flashing and the robot is fully
charged when the white LED is on
continuously.
English
27