Reset/Restore The Robot - Philips HomeRun 3000-Serie Bedienungsanleitung

English
28
Signal

Reset/restore the robot

Description of signal
The green LED on the Auto-Empty
station flashes.
The orange LED on the Auto-Empty
station flashes.
The orange LED on the Auto-Empty
station flashes.
The orange LED on the Auto-Empty
station flashes.
You can reset/restore the robot by pressing and holding both the home and
on/off buttons on top of the robot for 15 seconds.
Note: After resetting/restoring the robot, the robot needs to reconnect the
app, and the relevant settings in the app are removed.
Meaning of signal
The Auto-Empty station is vacuuming
the dust bin of the robot empty. The
dust and dirt are collected in the dust
bag of the station.
The canister lid is open.
There is no dust bag installed.
The dust bag is full.