Using Your Robot - Philips XU3000/02 Bedienungsanleitung

Using your robot

Preparing for a cleaning run
2
1
Start your first cleaning program via the app
Using the robot without the app
-
Before you start the robot on its cleaning run:
-
Attach the washable mop pad to the mop pad holder.
IMPORTANT: The mop pad holder can be removed. But when using the
robot with mop pad holder, the washable mop pad must always be attached
to the mop pad holder, even if you use the robot without mopping. This is to
prevent damage to the floor and the mop holder during use.
-
Remove all cables, wires, cords and small objects such as shoes and toys from
the floor to prevent the robot from getting entangled in them.
-
Open all in-house doors.
-
Pre-wet the mop for optimal results.
Start
1 Open the app.
2 Select the cleaning program: Regular cleaning or Custom cleaning.
3 Press the 'start' icon.
Note: If the battery level is too low, cleaning cannot start. Wait until the robot
is sufficiently charged before you start a cleaning run.
Stop
1 Press the Pause icon in the app. The robot stops.
2 Press the Start icon again. The robot continues.
3 Press the Home & charge icon. The robot goes back to the station.
Note: For an optimal experience, we recommend using the app.
Without the app, you can use the two buttons on the robot to operate it:
-
On/off button
-
Long press (3s) to turn the robot on and off.
-
Short press to start cleaning or to pause cleaning. Press again to resume
cleaning.
English
17