Philips HomeRun 3000-Serie Bedienungsanleitung Seite 15

English
18
Using the robot without the app
Your robot's cleaning pattern
3
2
1
2 Select the cleaning program: Regular cleaning or Custom cleaning.
3 Press the 'start' icon.
Note: If the battery level is too low, cleaning cannot start. Wait until the robot
is sufficiently charged before you start a cleaning run.
Stop
1 Press the Pause icon in the app. The robot stops.
2 Press the Start icon again. The robot continues.
3 Press the Home & charge icon. The robot goes back to the station.
Note: For an optimal experience, we recommend using the app.
Without the app, you can use the two buttons on the robot to operate it:
-
On/off button
-
Long press (3s) to turn the robot on and off.
-
Short press to start cleaning or to pause cleaning. Press again to resume
cleaning.
-
Home button
-
Short press (when the robot is not cleaning): the robot will find the station
and charge.
-
Short press while cleaning: the robot will stop cleaning. Short press again:
the robot returns to the station to charge.
-
Short press when the robot is driving back to the station: the robot will
pause returning to the station. Press again to let it drive back to the
station.
When operating the robot manually, it will vacuum and mop. However, if the
water tank is empty it won't mop.
The robot cleans the home in a structured way. The robot cleans room by room
and always starts by cleaning the edges of the room first before covering the
remaining surface.