Philips HomeRun 3000-Serie Bedienungsanleitung Seite 20

1
2
Cleaning the main brush
2
1
8 Fill the water tank from the water inlet. Insert the water tank in the correct
location.
Note: Make sure that the outside of the water tank is dry.
Note: Do not use cleaning detergents.
1 Put the robot upside down on a surface that is flat and stable.
2 Push the release buttons of the brush cover at the same time.
3 Lift and remove the brush cover.
4 Pull the main brush out.
5 Use the cleaning tool to cut through the hairs.
6 Remove the hairs and dirt from the main brush.
Tip: Use the brush end of the cleaning tool to remove the dirt on the main
brush.
7 If you have removed the cap on the end of the main brush, place it back.
English
23