Description Of The Unit; Application; Construction; Ce-Certifications - KEB COMBICONTROL C5 Compact Betriebsanleitung

COMBICONTROL
1.

Description of the unit

1.1

Application

KEB COMBICONTROL C5 is a programmable control with direct connection upto four KEB
frequency inverters/servo axes of the series F5. The connection to the axes is created as
HSP5/485. All axes can be operated directly and synchronously with an inexpensive operator
with this fast, reliable connection. Cycle times down to one millisecond are realizable. This
manual describes the release of the firmware V1.4 and higher.
The axis control is programmed with the uniform IEC 61131-3 programming system CoDeSys
of the 3S-Software Company, Kempten (Germany) (www.3s-software.com).
1.2

Construction

The control consists of following modules:
• CPU and memory
• internal flash file system
• Switching power supply
• Real-time clock
• HSP5/485-interfaces to the inverter/servo axes
• Ethernet interfaces
• serial interface
• Control and error LED's
• RUN/Reset switch
• Voltage supply connection
• four digital inputs
• four digital outputs
• Field bus interface (optional)
1.3

CE-certifications

This unit was tested in accordance with the generic standard EN 61000-6-2 in the range of noise
immunity and corresponds to the EMC directive 89/336/EWG with changes/extensions.
1.4 Unit identification
C5
Compact
GB - 4
Material number
14C5B00-1000
Description
4DI/4DO