Switching Between °C Und °F; Adjusting The E11 Offset - ECM Manufacture MECHANIKA MAX Bedienungsanleitung

8.9. Switching between °C und °F
Via the PID display you have the option of setting whether the temperature (t1 and t2) is displayed in °C
or in °F.
To configure this setting, please proceed as follows:
1. Press ▼ and ▲ simultaneously, "t1" will appear on the display.
2. Press the ▼ button until a "°" appears on the display. Press ▲ to enter
the menu.
3. You can now choose between C for Celsius and F for Fahrenheit by
pressing the ▼ button. The selection will be confirmed after 3
seconds.
8.10.

Adjusting the E11 offset

The MECHANIKA MAX is supplied with software designed for the optimal preparation of coffee beverages.
External factors may cause slight deviations between the temperature measuring point in the machine and
the temperature output. In such a case, you can use the E11 value to make slight adjustments to the offset
(temperature difference between NTC and brewing temperature).
To adjust the offset, please proceed as follows:
1. Press ▼ and ▲ simultaneously, "t1" will appear on the display.
2. Press the ▼ button until "E11" is displayed. Press the ▲ button to
enter the offset menu.
3. The offset value can now be adjusted in steps of 1 between -3 and
+3. The selection will be confirmed after 3 seconds.
Translation of the original German user manual
ENGLISH
51