Filter Reminder Fl - ECM Manufacture MECHANIKA MAX Bedienungsanleitung

3. Press ▼ until "PrA" appears on the display and confirm the selection
with ▲.
4. Set the desired active preinfusion time. This can be 0-9 seconds. The
selection will be confirmed after 3 seconds.
5. During active preinfusion, three dashes will be displayed; after which
the preinfusion starts.

8.3. Filter Reminder FL

The filter change reminder can be set in steps of one at a time from 0 to 200 litres. After the filter has been
changed, the reminder function must be reset so that the counter can start again and remind you to change
the filter after the set volume of water.
To programme the filter change reminder, please proceed as follows:
1. Press ▼ and ▲ simultaneously until "t1" appears on the display.
2. Press and hold the ▼ button until "FL" is displayed. Press ▲ to
enter the FL menu.
3. You can now programme the desired reminder in single steps,
between 0 and 200, by pressing ▼ and ▲. The selection will be
confirmed after 3 seconds.
The FL mode can be reset via the"rst" function in the menu (see 7.9).
Please refer to the instructions of the water filter used for the proper change interval.
Translation of the original German user manual
ENGLISH
48