Timer Settings Sby; Setting The Time Clo; Setting The Date Day - ECM Manufacture MECHANIKA MAX Bedienungsanleitung

8.4.

Timer settings Sby

The MECHANIKA MAX has the option for two automatic on/off times for weekdays (Mon-Fri) and two
automatic on/off times for weekends (Sat-Sun).
The function can be activated via the "Sby" menu option. Only once this option is active does the machine
use the settings in the "Sch" function to switch on and off automatically, if it is deactivated, the machine will
automatically ignore the settings in the "Sch" function. If the function states "Sby=off" then the machine uses
the counter of the Eco mode; if you see "Sby=on", the machine ignores the counter of the Eco mode.
To configure this setting, please proceed as follows:
1. Press ▼ and ▲ simultaneously, "t1" will appear on the display.
2. Press the ▼ button until "Sby" appears on the display. Press ▲ to
enter the menu.
3. You can now can switch the timer function on or off.
If you would like to to switch off the timer function, e.g. while on holiday, it is sufficient to
deactivate the Sby option. The settings in Sch remain saved and can be switched on again at
any time via the Sby option.
To use the timer function, the machine must remain connected to the mains and switched
on. Please make sure that the valves are closed and that the machine is out of reach of
children.

8.5. Setting the time Clo

Under the menu setting "Clo", the time can be set in steps of 10 between 00.0 and 23.5 using both up and
down keys.

8.6. Setting the date dAy

The current day of the week can be set under the menu setting "dAy". 1 corresponds to Monday and 2 to
Tuesday etc.
The set weekday is used to distinguish weekdays from weekends in the schedule settings.
Days 6 and 7 (i.e. Saturday and Sunday) correspond, as such, to the weekend.
Translation of the original German user manual
ENGLISH
49