General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PHSL 900 B4 Originalbetriebsanleitung

Explanation of the symbols on the appliance
Read the operating instructions
and safety advice before initial
operation!
Wear protective gloves!
Wear safety shoes!
Wear hearing protection!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Protect the tool from rain and
moisture!
Risk of fatal electrical shock! Keep
at least 10 m away from overhead
power lines.
Important! Beware of falling
objects, especially when cutting
above head height.
Important! Risk of injury due to
running blades.
Unplug the appliance immediately
if the cable is damaged or has
been cut.
Sound power level LWA in dB.
ATTENTION! Hot surface.
There is a risk of burns.
■ 4 │ GB │ IE
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
PHSL 900 B4