Symbols In The Manual; General Safety Instructions For Power Tools; Work Area Safety - Parkside PRTA 20-Li A1 Originalbetriebsanleitung

After turning off the ap-
pliance, the cutting disk
will keep revolving for a
couple of seconds. Keep away
from your hand and feet.
Do not expose the trimmer to
moisture. Do not work when
it is raining and do not cut
wet grass.
Keep by-standers well
away. They could be
injured by flung out
objects.
Danger due to materials
blown out of machine!
Remove persons in the vicini-
ty from the danger area.
Remove the battery prior to
servicing the appliance.
Noise level rating L
Electrical appliances must
not be disposed of with the
domestic waste.
Cutting circle
Parkside X 20 V TEAM.

Symbols in the manual

Warning symbols with
information on damage
and injury prevention.
General safety instruc-
tions for power tools
in dB Retain all safety directions and
WA
instructions for future use.
The term "Power Tools" used in the
safety instructions refers to mains-
operated power tools (with power
cord) and to battery-operated pow-
er tools (without power cord).

1) WORK AREA SAFETy

a) Keep work area clean
b) Do not operate power
Warning symbols with
information on the pre-
vention of personal injury
caused by electric shock.
Instruction symbols with infor-
mation on preventing damage.
Carefully read through the
user manual
Help symbols with information
on improving tool handling.
WARnInG! Read all
safety directions and
instructions. Omissions in
the compliance with safety
directions and instructions
can cause electrical shock,
fire and/or severe injuries.
and well lit. Cluttered or dark
areas invite accidents.
tools in explosive atmos-
pheres, such as in the
presence of flammable
Iiquids, gases or dust.
GB IE
23