Package Contents; Technical Specifications - Parkside PHSL 900 B4 Originalbetriebsanleitung

Package contents

1 motor unit PHSL 900 B4
1 hedge trimmer attachment
(hereinafter referred to as hedge trimmer)
1 boom
1 shoulder strap
1 blade guard
1 pair of safety goggles
1 hexagon spanner 4 mm
1 set of operating instructions
Technical specifications
Rated voltage
Rated output
Protection class
Weight, without handle
and shoulder strap
Number of strokes
Working angle
Cut length
Tooth spacing
Weight (ready for use)
Noise and vibration data
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise
level of the power tool is typically:
Sound pressure level:
Uncertainty
Sound power level
Guaranteed sound power level L
Uncertainty
PHSL 900 B4
230 V ∼, 50 Hz (AC)
900 W
II / (double insulation)
approx. 5 kg
1000 spm
–90° to +90°
410 mm
20 mm
approx. 5.2 kg
L = 81 dB (A)
PA
K = 3 dB
L = 102 dB (A)
WA
= 105 dB (A)
WA
K = 3 dB
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration on the front handle
Vibration emission value
Uncertainty
Vibration on the rear handle
Vibration emission value
Uncertainty
Wear hearing protection!
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with a
standardised test procedure and can be used
for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool.
► Try to keep the load as low as possible.
Measures to reduce the vibration load are,
e.g. wearing gloves and limiting the working
time. Wherein all states of operation must be
included (e.g. times when the power tool is
switched off and times where the power tool
is switched on but running without load).
a = 6.362 m/s 2
h,D
K = 1.5 m/s 2
a = 6.138 m/s 2
h,D
K = 1.5 m/s 2
GB │ IE │ 3 ■