Transport And Storage; Transporting The Product; Storing The Product; Returning The Product - Emerson AVENTICS 652 Montageanleitung

4 Transport and storage

4.1 Transporting the product

Hazards during transportation
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
• Ensure that the product cannot fall down before the product is released from
the mountings.
• Take steps to avoid damage when lifting the product.
• Wear PPE.

4.2 Storing the product

Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Only store the product in locations which are dry, cool, and prevent corrosion.
• Protect the product from direct sunlight and UV radiation.
• Keep the product in its packaging until the time of installation.
• Also observe any additional storage information on the product packaging.

4.3 Returning the product

• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.

5 Product description

5.1 Brief description

The product is used to monitor flow of compressed air, argon, helium, carbon
dioxide and gaseous nitrogen for industrial applications in accordance with the
technical specifications.

5.2 Labeling and identification

Product identification

The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• On the name plate.
CE mark
This product complies with the Electromagnetic Compatibility (EMC) Di-
rective 2014/30/EU and its amendments. The product is labeled with CE
identification. The declaration of conformity is available on request.
Please provide the material number and serial number for the correspond-
ing products.

5.3 Product overview

5.3.1 Versions

1
2
3
Fig. 1: Parts at a glance
1 Ethernet product variant: M12 plug,
8-pin, X-coded or IO-Link product
variant: M12 plug, 5-pin, A-coded
3 Buttons/control buttons
The product is available in the following product variants:
AVENTICS™ 652/653 | 549411-001-AB | English
2 Color OLED
Series Product variant
652 Filter product variant
Pipe product variant
653 Filter product variant
Pipe product variant
6
5
Fig. 2: Dimensions of filter product variant
Table 1: Dimensions of filter product variant (specifications in mm)
Series Interface 1
652 IO-Link (A) 99
Ethernet (B) 99
653 IO-Link (A) 135
Ethernet (B) 135
8
7
6
5
4
Fig. 3: Dimensions of pipe product variant
Table 2: Dimensions of pipe product variant (specifications in mm)
Interface 1 2
IO-Link (A) 94.3 72.5
Ethernet (B) 94.3 72.5

5.3.2 Operating functions and operating elements

Navigation with buttons
The product has 4 buttons below the display for the following operations:
• Navigating between configuration menus
• Selection of functions and values
• Switching the display
Interface
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
IO-Link (A)
Ethernet (B)
2
1
7
2 3 4 5
132 71.4 178 35
132 75 178 35
180 71.4 219 46.5
180 75 219 46.5
M12
1
3 2
3 4 5 6
21.8 21.8 45.3 21.8
21.8 21.8 45.3 21.8
3
4
6 7
107 38.3
107 38.3
119 43.8
119 43.8
7 8
109 18.5
109 13.5
21