Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page GB-16
Care and maintenance
Care and maintenance
WARNING
Risk of injury!
Improper handling of the appliance
may result in injury.
Before cleaning the exhaust hood or
■
changing the filter, pull out the mains
plug. If the mains plug is difficult to
access, switch off the corresponding
fuse or pull it out.
Cleaning the housing
CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fire. There is a
fire risk if cleaning is not carried out in
accordance with the instructions.
Grease residue on the exhaust hood
■
or in the grease filters can catch fire
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease filters reg-
ularly.
• Wipe the surfaces with a soft, damp cloth
and a little dishwashing detergent. Do not
use any sharp objects or scouring pow-
ders, as these can scratch the surface.
• Clean glass surfaces with standard glass
cleaner.
Cleaning the grease filters
NOTICE
Risk of damage to property!
Improper handling of the appliance
can lead to damage to property.
Handle the grease filters carefully to
■
avoid bending or creasing the fine
mesh.
Only reinsert the grease filters after
■
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60 °C), or soak in lukewarm
water with detergent.
1. Unplug the mains plug or switch off the
corresponding circuit.
(17)
2. Open the lock (17) on one grease fil-
ter (16) and carefully remove the grease
filter.
3. Repeat this step for the second grease
filter.
4. Wash the grease filters (16) in a dish-
washer or in the sink like ordinary dish-
ware.
(16)
Werbung
Inhaltsverzeichnis
