When You Have Finished Cooking - Candy CID 30/G3 Bedienungsanleitung

If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone. The display will automatically turn off after 2 minutes if no suitable
pan is placed on it.

When you have finished cooking

1. Touching the heating zone selection control
that you wish to switch off.
2. Turn the cooking zone off by scrolling down to" 0" or touching"-"
and"+" control together. Make sure the display shows"0".
3. Turn the whole cooktop off by touching the ON/OFF control.
alternately with the heat
OR
EN-9