Before Locating The Fixing Brackets - Candy CID 30/G3 Bedienungsanleitung

• the isolating switch will be easily accessible to the customer with the
hob installed
• you consult local building authorities and by-laws if in doubt
regarding installation
• you use heat-resistant and easy-to-clean finishes (such as ceramic tiles)
for the wall surfaces surrounding the hob.
When you have installed the hob, make sure that
• the power supply cable is not accessible through cupboard doors or drawers
• there is adequate flow of fresh air from outside the cabinetry to the base of
the hob
• if the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below the base of the hob
• the isolating switch is easily accessible by the customer.

Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 4 brackets on the bottom of hob
(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
Cautions
1. The induction hotplate must be installed by qualified personnel or
technicians. We have professionals at your service. Please never conduct
the operation by yourself.
EN-21