When You Have Finished Cooking - Candy CIES55MCTT Bedienungsanleitung

If you don't set the power within 1 minute, the induction hob will
a.
automatically switch off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
b.
If slide along the "—", power will vary from stage 1 to stage 9.
c.
If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is placed
on it.

When you have finished cooking

1. Turn the cooking zone off by slide along the "—" to the left point, and then hold
for 1 second.
Make sure the power display shows "0", then shows "H".
Or
alternately with the heat
and then
EN-12