When You Have Finished Cooking; To Start Cooking; Locking The Controls - Candy CEH6DXECTT/1 Bedienungsanleitung

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Using your Ceramic Hob

To start cooking

1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
" – " or " – – ", indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control, and
a indicator next to the key will flash.
4. Set a power level by touching the "-" or "+" control.
• If you don't choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
5. When zone 1 or 3 is working, touch the heating zone selection
control then activate double zone or oval zone by pressing
When double zone or oval zone is working, touch the heating zone selection
control then turning off the double zone or oval zone by pressing
.
EN-9

When you have finished cooking

1. Touching the heating zone selection control that you
wish to switch off.
2. Turn the cooking zone off by touching the "-" and scrolling down
to "0", or holding the "+" and "-" button at the same time for 1 second, it will cut
down to "0" directly.
Make sure the power display shows "0", then shows "H".
3. Turn the whole cooktop off by touching the "ON/OFF" control.
4. Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use the hotplate that is still hot.

Locking the Controls

• You can lock the controls to prevent unintended use (for example children
accidentally turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show "Lo".
To unlock the controls
1. Make sure the ceramic hob is turned on.
2. Touch and hold the keylock control for a while.
3. You can now start using your ceramic hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF
Operation
.
and then
,
you can always turn the ceramic hob off with the ON/OFF
control in an emergency, but you shall unlock the hob first in the next
EN-10