Herunterladen Inhalt Inhalt Diese Seite drucken

EINHELL FREELEXO CAM Originalbetriebsanleitung Seite 60

Vorschau ausblenden Andere Handbücher für FREELEXO CAM:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Alarm LED (57)
Lit yellow
Anl_FREELEXO_CAM_SPK13.indb 60
Anl_FREELEXO_CAM_SPK13.indb 60
GB
Description / possible cause
The mower is lifted:
- The lifting sensor has been
continually tripped for 10 se-
conds
The mower is blocked:
- The obstacle sensor has
been activated several times
in one minute
- The obstacle sensor has
been constantly activated for
10 seconds
- The obstacle sensor has
been activated three times
on the way back to the char-
ging station (19)
Too close to the station:
- The robot lawn mower was
sent back too close to the
charging station (19)
Toppled:
- The robot lawn mower was
constantly tilted for 10 se-
conds
- The robot lawn mower has
been tilted for a long time in
one direction
- 60 -
Solution
Press the „STOP" button (3) in order to open
the control panel cover (13). Re-start the mo-
wing operation on the control panel (2):
- If this fault occurs frequently, check the
mowing area for obstacles taller than 10
cm and either remove them or separate
them from the mowing area.
Press the „STOP" button (3) in order to open
the control panel cover (13). Re-start the mo-
wing operation on the control panel (2):
- Check whether the robot lawn mower
is blocked by an obstacle or jammed
between trees, bushes, etc. Remove the
obstacle or avoid this area.
- If this fault occurs frequently, check the
mowing area. Pay particular attention to
tight angles, corridors, fences, rocks, etc.
- Check whether the grass is too tall and
blocks the robot lawn mower. If this is the
case, mow the grass to below 60 mm.
Press the „STOP" button (3) in order to open
the control panel cover (13). Re-start the mo-
wing operation on the control panel (2):
- The robot lawn mower should be sent
back to the charging station (19) at a mini-
mum distance of 2 m.
Press the „STOP" button (3) in order to open
the control panel cover (13). Re-start the mo-
wing operation on the control panel (2):
- Move the robot lawn mower to a level area
and restart it.
- If the robot lawn mower is tilted because
of a steep slope in the mowing area, se-
parate this area in order to avoid severe
inclines.
01.12.2022 15:35:25
01.12.2022 15:35:25

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

34.139.90

Inhaltsverzeichnis