Starting Procedure - EINHELL FREELEXO CAM Originalbetriebsanleitung

running time might not be reached.
This also applies when the set start time occurs
during twilight or in darkness. Then the robot lawn
mower will initially leave the charging station (19),
only to return immediately along the guide cable
(24) to the charging station (19). This results in the
robot lawn mower not working on this day
1. Unlock the control panel (2).
2. Select the desired mowing time by pressing
the corresponding button for setting the mo-
wing time (60):
2.1 If you press the corresponding button (60)
briefl y, the robot lawn mower will mow each
day. This will be indicated by the selected time
LED lighting up permanently.
2.2 If you press the corresponding button (60)
and keep it pressed for longer (6 seconds),
the robot lawn mower will mow every second
day. This will be indicated accordingly by the
selected time LEDs fl ashing.
3. This will be indicated accordingly by the time
LEDs (50).
4. To confi rm the setting, press the "OK" button
(63).
The original duration of the set mowing window
will be changed accordingly. The then applicable
start time will remain unchanged but the duration
will be altered to the indicated number of hours.
It is recommended to base the mowing time set-
ting on 8 hours per day for 400 m² as a guideline.
The selected working time must be adapted to
take account of the garden's size and complexity.
Resetting the daily start time
To reset the daily start time, press the "OK" button
(63) and the "6H" button (60) simultaneously and
hold for 3 seconds. A successful reset will be con-
fi rmed with 5 beeps. Then restart the robot lawn
mower with the button "START A/B" (64). The time
at which the change was made is now the daily
start time. The number of hours shown is the daily
work time.

Starting procedure

1. Unlock the control panel (2).
2. You can use the button "START A/B" (64) to
select the area in which the lawn mower is to
work. More details of the two areas can be
found in the section "Before using for the fi rst
time" under "Mowing area".
2.1 If you press the button "START A/B" (64) brief-
ly, the robot lawn mower will mow in the main
area (A). In this case the status LED (52) will
Anl_FREELEXO_CAM_SPK13.indb 53 Anl_FREELEXO_CAM_SPK13.indb 53
GB
light up green permanently.
2.2 If you press the button "START A/B" (64) and
keep it pressed for longer, the robot lawn mo-
wer will mow in the secondary area (B). The
status LED (52) will then fl ash green.
3. Close the control panel cover (13).
The robot lawn mower will now operate in ac-
cordance with the mowing time setting. The batte-
ry charge level is monitored during the work time
and displayed via the battery LED (55). Whenever
the battery charge level drops to 30%, the robot
lawn mower will automatically return to the char-
ging station (19).
Note: A reference value of the quality value is
needed to operate the robot lawn mower. This
reference value is determined as described in
the section "Garden boundaries – Boundary
quality value", which is why the robot lawn
mower begins initially with its mower unit
switched off . If the value was determined
already, the robot lawn mower will begin with
the starting procedure in accordance with the
selected mowing time setting.
Canceling the mowing operation
1. To bring the robot lawn mower to an immedia-
te stop, press the „STOP" button (3).
2. Open the control panel cover (13) fully.
3. Unlock the control panel (2).
4. Press the "HOME" button (61) to send the
robot lawn mower back to the charging station
(19).
5. Close the control panel cover (13).
6. Now the robot lawn mower will search for the
guide cable (24) in order to fi nd the charging
station (19). First it will travel forwards a few
meters and then stop in order to re-orientate.
This will continue until the robot lawn mower
arrives at the guide cable (24). Then the robot
lawn mower will follow the guide cable (24)
counterclockwise. Make sure there are no ob-
jects lying on the guide cable (24).
„STOP" status:
When you press the „STOP" button (3), the robot
lawn mower will adopt a „STOP" status. This will
be indicated by the time LEDs (50) fl ashing one
after the other. The robot lawn mower will interrupt
its mowing until this „STOP" status is canceled.
The „STOP" status can be canceled as follows:
•
By unlocking the robot lawn mower and pres-
sing the button „START A/B" (64) in order to
send off the robot lawn mower to mow. Close
- 53 -
01.12.2022 15:35:21 01.12.2022 15:35:21