EINHELL FREELEXO CAM Originalbetriebsanleitung Seite 58

Battery LED (55)
Lit green
Lit red
Flashing green
Flashing red
Lit yellow
Anl_FREELEXO_CAM_SPK13.indb 58 Anl_FREELEXO_CAM_SPK13.indb 58
GB
Description / possible cause
- The battery is fully charged
- The charge status of the bat-
tery is low
- The battery is being charged
Battery fault:
- The robot lawn mower has a
battery fault
- The battery cannot be char-
ged
- The battery has reached the
end of its service life
Overheating fault:
- The temperature of the bat-
tery is too high/too low or the
controller is overheated
- If the battery temperature
exceeds 65 °C, the robot
lawn mower will return to the
charging station (19).
- If the battery temperature ex-
ceeds 45°C or drops below
0°C, charging will be stopped
and the robot lawn mower
will wait at the charging stati-
on (19).
- 58 -
Solution
- The robot lawn mower is ready
- The robot lawn mower travels to the char-
ging station (19) in order to charge the
battery.
- The robot lawn mower is in the charging
station (19) and is being charged.
- Make sure that the battery was correctly
fi tted.
- Check whether the main switch (7) is swit-
ched on (ON) while the robot lawn mower
is in the charging station (19).
- Check the position of the charging station
(19).
- Replace the battery if necessary.
- Set the work time in summer to the early
hours of morning and avoid running the
robot lawn mower during the hours of the
day when it is hot.
- After the battery or controller has cooled
down to the permissible temperature ran-
ge, the robot lawn mower automatically
returns to programmed operation.
01.12.2022 15:35:24 01.12.2022 15:35:24