Miele PFD 104 SCVi Marine Kurzgebrauchsanweisung Seite 39


Before connecting the appliance, ensure that the connection data
on the data plate (voltage, frequency and fuse rating) match the
mains electrical supply.

The dishwasher may only be operated if the door opening mech-
anism is working correctly. Otherwise, there could be a risk of
danger whilst the automatic door opening mechanism (depending on
the model) is active.
The maximum weight of the front panel that can be aligned with the
factory-fitted door springs is 5–12 kg (depending on the model).
Signs that the door opening mechanism is working correctly:
- The door springs must be evenly adjusted on both sides. They are
correctly adjusted when the door remains stationary when left half
open (approx. 45° opening angle). It is also important that the
door cannot fall open.

There must be no electrical sockets behind the dishwasher.
Danger of overheating and fire risk if the dishwasher were to be
pushed up against a plug. See "Electrical connection".

Do not connect the dishwasher to the mains electricity supply via
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

Never open the casing of the dishwasher. Any contact with live
connections or tampering with the electrical or mechanical compon-
ents of the dishwasher will endanger your safety and may lead to ap-
pliance malfunctions.

The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be re-
placed by a suitable connection cable of the same type. For safety
reasons, such replacement may only be carried out by the Miele
Customer Service Department or a qualified service technician.

The dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.
en - Warning and Safety instructions
39