hanseatic VC-T4020E-1 Gebrauchsanleitung Seite 66

Troubleshooting table
Problem
Appliance
switches itself
off.
Possible cause
Brush/nozzle
blocked.
Motor protection
filter (37) blocked.
Overheat
protection has
been activated.
Telescopic tube
(17)/ suction hose
(16) is blocked.
Solutions, tips
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, clean the
brush/nozzle.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug
from the socket, allow the
appliance to cool down for at
least 30 minutes and clean the
motor protection filter.
Press the On-Off foot switch/
suction force control unit,
disconnect the mains plug,
check the telescopic tube and
suction hose for blockage and
clean if necessary.
Page EN-29