hanseatic VC-T4020E-1 Gebrauchsanleitung Seite 59

Page EN-22
Cleaning the universal
floor nozzle
• Vacuum the underside of the
universal floor nozzle (18) now
and again with the crevice
nozzle (22).
Cleaning the turbo brush
CAUTION
Risk of injury!
Improper handling of the ap-
pliance may cause injuries.
■ Never touch moving parts
of the appliance and acces-
sories, for example, turbo
brushes. There is a risk of
fingers becoming trapped.
■ Always remove the turbo
brush from the telescopic
tube or suction hose before
cleaning.
If the turbo brush is no longer
working properly:
1. Disconnect the mains plug (13)
from the socket and remove
the turbo brush (19) from the
telescopic tube (17) or from
Cleaning and maintenance
the telescopic tube handle on
the suction hose (16).
2. Open the
flap (34) on the bottom of the
turbo brush (19).
(36) (35)
3. Remove lint and hair from the
brush (35) and from the air
blade wheel (36) underneath
the maintenance flap (34).
(34)
maintenance