hanseatic VC-T4020E-1 Gebrauchsanleitung Seite 64

Cleaning and maintenance
(44)
(11)
1. Press the locking button (44)
on the cover (11) for the ex-
haust air filter and remove the
cover.
(46)
(45)
(11)
2. Pull out the exhaust air fil-
ter (45) and tap it out over a
waste bin.
3. If the exhaust air filter is very
dirty, clean it thoroughly with
water (max. 40 °C) and al-
low it to dry completely at
room temperature (at least 24
hours).
4. Reinsert the exhaust air filter
with the recess (46) facing
upwards and place the cov-
er (11) back on top. Make sure
that you hear the cover click
into place.
The article number for
re-ordering the exhaust fil-
ter is listed in chapter "Ser-
vice" on page EN-31.
Page EN-27