Parkside PHPA 4 C4 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 13

During breaks in work, keep the product on its standing position so that the
product is standing on its base
Allow the product to cool completely after use and before storage .
Do not work on any material containing asbestos .
Avoid the risk of injury or fire as well as health risks: Risk of burns! The
nozzle reaches a temperature of over +190 °C . The glue reaches a
[ 1 ]
temperature of over +190 °C . Do not touch the nozzle
thermal protection for nozzle
to come into contact with people or animals . In case of contact with skin, rinse
the affected part in cold running water for a few minutes . Do not attempt to
remove the adhesive from the skin .
Battery tool use and care
Recharge only with the charger specified by the manufacturer.
a)
A charger that is suitable for one type of battery pack may create a risk of fire
when used with another battery pack .
Use power tools only with specifically designated battery
b)
packs. Use of any other battery packs may create a risk of injury and fire .
When battery pack is not in use, keep it away from other
c)
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may
cause burns or a fire .
.
6 ] [
as it will be very hot . Do not allow hot glue
2 ] [
, the hot glue or the
1 ] [
GB 13