Connecting The Device - Imperial DABMAN i210 CD Bedienungsanleitung

2 . SAFETY INSTRUCTIONS
Performance errors may become apparent in the shape of the device beco-
ming hot or smoke developing from the device or the power unit. Loud or
unusual sounds may also be a sign of a malfunction.
› In such an event, immediately remove the power unit from the socket.
› Only touch the casing of the power unit. Never pull the power unit's plug
E
from the socket. The device may not be used after a malfunction, until a
trained person has inspected or repaired it.
› If you introduce the device to a cold or warm environment, moisture may
develop inside the device. In such an event, wait approximately one hour
before using the device.
› Should you be gone for a longer period or in the event of a thunderstorm,
unplug the device.
Take care to prevent moisture, water or splash water from coming into con-
tact with the device and ensure that receptacles filled with water - e.g. vases
- are not placed on or near the power unit.
› In the event that foreign objects or liquid should enter the device or power
unit, immediately unplug the power unit. Have a qualified specialist inspect
the device before using it again. Otherwise there is a risk of electrocution.
› Make sure that the device and power unit is not at risk of dripping or
splash water and that there are no open flames (e.g. lit candles) near the
device or the power unit.
› The power unit must never be touched or grabbed with wet or moist hands.

2.4. Connecting the device

› Only plug the device into properly installed, earthed and electrically secured
power sockets.
› Please keep the power source (socket) easily accessible.
Operating Manual 102