Connecting The Device - Imperial DABMAN 13 Bedienungsanleitung

2. SAFETY INFORMATION
> Make sure that the device and power unit is not
at risk of dripping or splash water and
that there are no open flames (e.g. lit candles) near
the device or the power unit.
> The power unit must never be touched or grabbed
with wet or moist hands.

2.4. Connecting the device

> Only plug the device into properly installed, earthed
and electrically secured power sockets.
> Please keep the power source (socket) easily
accessible.
> Do not bend or squeeze any cables.
> Before using the device, check whether the voltage
specification on the device corresponds to your
local power voltage.
The specifications on the power unit must correspond to the
local power grid.
> Only plug the device into a properly installed grid
socket with 220-240 V alternating current,
50-60 hz.
> Place the radio on a solid, even surface.
> The device consumes power in standby mode.
To fully switch off the device, the power plug must be pulled
from the socket orthe power unit on the back of the device
must be switched off.
45