Protecting The Device Against Damage - Imperial DABMAN i210 CD Bedienungsanleitung

2 . SAFETY INSTRUCTIONS
› Do not bend or squeeze any cables.
› Before using the device, check whether the voltage specification on the
device corresponds to your local power voltage. The specifications on the
power unit must correspond to the local power grid.
› Only plug the device into a properly installed grid socket with 220-240 V
alternating current, 50-60 hz.
› Place the radio on a solid, even surface.
› The device consumes power in standby mode. To fully switch off the device,
the power plug must be pulled from the socket or the power unit on the
back of the device must be switched off.

2.5. Protecting the device against damage

› Unfavourable surrounding conditions, such as moisture, excessive heat or a
lack of ventilation may damage the device.
› Only use the device in dry rooms. Avoid direct proximity to heat sources,
such as radiations, open fires (e.g. from candles), devices with a strong
magnetic field, such as loudspeakers. Do not expose the device to extreme
conditions, such as direct sunlight, severe humidity, moisture, extremely
high or low temperatures, open flames.
› Ensure sufficient distance to other objects to prevent the device from being
obstructed, so that sufficient air ventilation is guaranteed.
› Avoid direct sunlight and places with an exceptional amount of dust.
› Do not place any heavy objects on the device or the power unit.
› Do not use the device in areas that have a high explosion risk.
103 IMPERIAL DABMAN i210 CD
®
E