Dimmer; Display; Power Settings - Imperial DABMAN i210 CD Bedienungsanleitung

7 . SETTINGS

7.1.8. Dimmer

You can adapt the brightness of the display by using the dimmer function. The
device is factory-set with the highest brightness level. This menu item allows
you to custom-adjust the brightness level. Use the
control in the Settings menu to select Dimmer in the menu and press the
ENTER button on the remote control or the
Power saving mode:
When the power saving mode is activated, the display is dimmed to the set
brightness if the device is not operated within 15 seconds. Select the Power
Saving Mode option and confirm your selection. Then use the
select the brightness level you want for this mode.
Switching on:
When this menu item is activated, the display is permanently dimmed to the
set brightness. Select the Switch on option and confirm your selection. Then
use the ▸ ◂ buttons to select the brightness level you want for this mode.

7.1.9. Display

Change the colour display to black and white if needed. Use the
on the remote control in the Settings menu to select Display and press the
ENTER button on the remote control or confirm with the
unit. Change the display colour to monochrome if needed.

7.1.10. Power settings

Whenever the radio is not playing music, the device will automatically turn off.
This is the case, for example, if there is no signal in DAB radio mode or if no
playback device is connected in AUX mode. Here you can determine whether
or after what time the radio should automatically switch from operation to
standby mode. You can choose between 5, 15 and 30 minutes.
▼▲
ENTER button on the unit.
133 IMPERIAL
buttons on the remote
▸ ◂ buttons to
▼▲ buttons
ENTER button on the
DABMAN i210 CD
®
E