Date & Time; Set The Date & Time - Imperial DABMAN i210 CD Bedienungsanleitung

7 . SETTINGS
Activate or deactivate this function with the
and confirm by pressing the
ENTER button on the remote control.
7.1.4. Date & time
Set the time and date in this menu item.
E
The device is factory-configured to automatically set the time. If the device is
connected to the Internet via a network, the time and date are automatically
synchronised. It is thus not necessary to set the time.
7.1.4.1. Set the date & time
Use the ▼▲
press the ENTER
device. Select the Manual setup menu item and press the
the remote control or confirm with
on the device or on the remote control to set the time or date. Please use
the ►◄ buttons to jump to the next or previous field. Using the
on the remote or a short press of the
the entry.
Operating Manual
ENTER
buttons on the remote control to select Set date and time and
button on the remote or confirm by using
▼▲ buttons of the remote control
button on the device or by pressing the
ENTER on the unit. Use the
ENTER button on the radio concludes
128
ENTER on the
ENTER button on
▼▲ buttons
ENTER button