Imperial DABMAN i210 CD Bedienungsanleitung Seite 130

7 . SETTINGS
To set up an alarm time, proceed as follows:
Use the ▼▲
Alarm clock and press the
with the ENTER
confirm by pressing the
on the remote control. Activate the alarm clock via the On option. Deactivate
E
the alarm clock via the Off option. Once you have activated the alarm, you can
set the repeat intervals, the alarm time and type in the following menu.
Repeat:
Here you can choose daily, once, or one or several days of the week.
Time:
Set the time at which the alarm clock is to be triggered here. Use the numeric
keypad on the remote control or the
Source:
Decide which alarm signal you would like to activate here. A sound, melody,
Internet radio, FM, DAB/DAB+ or USB. Please note that when selecting FM,
DAB/DAB+ or Internet radio, at least one favourite station must be stored for
the respective reception mode. If no favourite is stored in the selected recep-
tion mode, the empty message appears.
To confirm single entries, save these with the
the menu, hit the arrow button
a favourite station. To stop an alarm, hit the standby button on the remote
control. To active that snooze function, press the
alarm. The alarm will then be paused for 5 minutes. After 5 minutes, the alarm
is reactivated.
Operating Manual
buttons on the remote control in the Settings menu to select the
ENTER
button on the unit. Select Alarm clock 1 or Alarm clock 2 and
ENTER
button on the remote control or confirm
button on the device or use the
▼▲ buttons on the device.
ENTER
◄ . Please also read chapter 9.8. on saving
130
ENTER
button. To return to
ENTER button during an
button