Mounting The Antenna; Power Connection; Network Connection; Language Selection - Imperial DABMAN i210 CD Bedienungsanleitung

6 . INSTALLATION

6 .3 Mounting the antenna

Screw the included antenna into the radio's antenna connector.

6 .4 . Power connection

Connect the included power supply unit to the corresponding socket on the
back of the device. Now plug the power supply unit into a 230V socket. Then
pull out the telescopic antenna on the back of the radio to its full length to
ensure the best possible reception if you wish to receive terrestrial transmit-
ters via the antenna.

6 .5 . Network connection

To use the radio's Internet functions, the device must be connected to a
network. You can use a cable (LAN) or the integrated WIFI receiver to make
a connection. If you are using a LAN cable, connect it to the LAN connector
(see image on page 24, point 13).

6 .6 . Language selection

Turn on the main switch on the back of the unit. The radio will start. Use the
up/down buttons on the remote control to select the menu language. Confirm
the desired menu language with the

6 .7 Network check

If you want to connect the radio to your home network, confirm the following
menu prompt with Yes. With this setting, the radio checks the available net-
works each time it turns on.
ENTER button on the remote control.
119 IMPERIAL DABMAN i210 CD
®
E