Lan Network Settings - Imperial DABMAN i210 CD Bedienungsanleitung

7 . SETTINGS
E
Select the desired menu item with the buttons
ENTER.

7.1.3.1. LAN network settings

If you want to integrate the radio into your network with a network cable,
you can activate a wired network connection in these settings. Use the
buttons on the remote control to select the wired network settings menu
item.Confirm the selection with the
by pushing the
connection via a LAN cable by selecting the corresponding menu item.Confirm
the selection with the
ENTER button on the device.
The network function via a LAN cable is activated when the device is started
from standby mode. If you plug in the network cable when the device is on,
switch it off using the power button on the radio or the
remote control and then on again.
Operating Manual
ENTER button on the device. Activate or deactivate a network
ENTER button on the remote control or by pushing the
▼▲ and confirm the entry with
ENTER button on the remote control or
124
POWER button on the
▼▲