Connecting The Device - Imperial DABMAN 14 Bedienungsanleitung

2. SAFETY INFORMATION
Loud or unusual sounds may also be a sign of
a malfunction.
> In such an event, immediately remove the power unit from the
socket.
> Only touch the casing of the power unit. Never pull the power
unit's plug from the socket.
The device may not be used after a malfunction, until a trained person has
inspected or repaired it.
> If you introduce the device to a cold or warm
environment, moisture may develop inside the device.
In such an event, wait approximately one hour before using the device.
E
> Should you be gone for a longer period or in the event of a
thunderstorm, unplug the device.
Take care to prevent moisture, water or splash water from
coming into contact with the device and ensure that receptacles
filled with water - e.g. vases - are not placed on or near the
power unit.
> In the event that foreign objects or liquid should enter the
device or power unit, immediately unplug the power unit. Have a
qualified specialist inspect the device before using it again.
Otherwise there is a risk of electrocution.
> Make sure that the device and power unit is not at risk of
dripping or splash water and that there are no open flames
(e.g. lit candles) near the device or the power unit.
> The power unit must never be touched or grabbed with wet or
moist hands.

2.4. Connecting the device

> Only plug the device into properly installed, earthed and
electrically secured power sockets.
> Please keep the power source (socket) easily accessible.
> Do not bend or squeeze any cables.
> Before using the device, check whether the voltage specification
on the device corresponds to your local power voltage.
The specifications
OPERATING MANUAL 52