Resume Playback After Switching On; Software Update; Reset To Factory Setting - Imperial DABMAN i210 CD Bedienungsanleitung

7 . SETTINGS

7.1.21. Resume playback after switching on

In this menu item you can determine whether the playback of a music file
via a connected USB data carrier should be continued automatically after
switching on. Use the ▼▲ buttons of the remote control in the setting menu
to select Continue playback after switching on and press the ENTER button
on the remote control or the ENTER button on the device. Switch the function
E
on or off.

7.1.22. Software update

To improve the functions of the device, it may be necessary to update the
operating software.The USB interface allows you to update your radio's ope-
rating software, which can be downloaded from www.telestar.de if necessary.
The software provided on the website must be unpacked. The unpacked file
is then transferred to an appropriate storage medium and connected to the
radio via the USB port. A description of the exact procedure can be found in
the download file.

7.1.23. Reset to factory setting

You can reset all the radio settings you have made to the factory settings.
This is useful if you have made changes that have resulted in the device not
functioning optimally. Use the ▼▲ buttons of the remote control in the settings
menu to select Reset to factory settings and press the ENTER button on the
remote control or confirm with the ENTER button on the device. Select Yes
if you want to reset the device, select No if you want to cancel the process.
Please note:
When you activate this function, all menu settings and stored stations will be
deleted.
141 IMPERIAL DABMAN i210 CD
®