Using Alarm; To Set The Alarm; When The Arlarm Sounds; To Cancel Alarm - Imperial DABMAN 30 Bedienungsanleitung

9. USING THE ALARM
You can set an alarm on your radio when it is switched on or in 'Standby' mode. You can
choose to wake to a buzzer or to a DAB or FM radio station.

9.1 To set the alarm

1. Press the 'Alarm' button. 'OFF' will flash in the display.
2. Turn the rotary 'Tune' control to display 'ON' or 'OFF' and press the 'Tune' control to
select 'ON'. '00' will flash in the display.
3. Turn the 'Tune' control to set the hour for your alarm and press the 'Tune' control to
select. '00' will flash in the display.
4. Turn the 'Tune' control to set the minutes for your alarm and press the 'Tune' control
to select. 'Alarm1 Type' is displayed.
E
5. Turn the 'Tune' control to choose to wake to a buzzer or to DAB or FM radio and
press the 'Tune' control to select.
Note: If you select to wake to DAB or FM radio, the alarm will use the last DAB or FM sta-
tion that the radio was tuned to.
6. When you turn the radio off a small bell symbol will be displayed in the top right of the
display to confirm that an alarm has been set.
9.2 When the alarm sounds
1. Press the 'Alarm' button once to stop the alarm.

9.3 To cancel alarm

1. Follow the steps 'To set an alarm' on this page and select 'OFF' at step 2.
33 IMPERIAL DABMAN 30
22-130-00_BDA_IMPERIAL DABMAN 30 3 Sprachen_11_16.indd 33 16.11.16 11:05