Connecting The Device - Imperial DABMAN d35 BT Bedienhandbuch

2. SAFETY INSTRUCTIONS
> If you move the device from a cold to a warm environment,
moisture may develop inside the device.
In such a case, wait for approximately one hour before using it.
> In case of prolonged periods of absence or thunder storm,
unplug the device from the wall socket.
> If foreign bodies or liquids enter the device, immediately
disconnect the power supply unit from the wall socket.
Have the device inspected by a qualified person before
E
using it again.
Otherwise, you run the risk of an electric shock.

2.5. Connecting the device

> Only connect the device to a professionally installed, earthed
and electrically fused wall socket.
> Make sure that the power source (wall socket) is easily
accessible.
> Do not bend or squeeze the cable connections.
> Before operating the device, check that the voltage indicated
on the device matches the local mains voltage.
Operating Manual 62