Withdrawal From Service - Tractel HT Access Installations-, Gebrauchs- Und Wartungsanleitung

Confirmation of the legibility of the product markings
should be an integral part of the periodic inspection.
On completion of the periodic inspection, the return to
service must be indicated in writing by the authorised
and competent technician who carried out the
inspection. This return to service must be recorded on
the inspection sheet in the middle of this manual. This
inspection record should be retained throughout the
product's life cycle, up until it is recycled.
After arresting a fall, this product must undergo a
periodic inspection as described in the current article.
The product's textile components must be changed,
even though they may not display any visible changes.
13. Lifespan
Mandatory annual inspection
Tractel's safety equipment and systems for working at
heights must, from the date of manufacture, be subject
to:
• Normal use in compliance with the recommendations
for use in the manual of the equipment or system,
• A periodic examination which must be carried out at
least once a year by an authorised and competent
technician. At the end of this periodic examination, the
product must be declared in writing fit for use,
• Strict compliance with the storage and transport
conditions mentioned in the equipment or system
manual.
Service life
Tractel considers this equipment or systems as textile
height safety equipment or systems.
These equipment, which are mainly composed of
perishable elements, have a maximum lifespan of
20 years from the date of manufacture.

14. Withdrawal from service

When disposing of the product, all components must
be recycled by firstly sorting them into metallic and
synthetic materials. These materials must be recycled
by specialist bodies. During disposal, dismantling and
separating the components should be undertaken by a
duly trained person.
Manufacturer's name and address:
Tractel SAS - RD 619 - BP 38
Saint Hilaire sous Romilly
10102 Romilly sur Seine
France
EN
15