Working Procedures; Assembly; Dust/Chip Extraction; Connecting A Dust Extraction Appliance - Parkside PMFW 310 D2 Originalbetriebsanleitung

Working procedures

Working principle
The oscillating drive causes the application tool to
move back and forth at speeds of up to 21000
times a minute . This allows for precision work even
in confined spaces .
Sawing/cutting
■ Use only undamaged saw blades that are in
perfect working order . Bent, blunt or otherwise
damaged saw blades may break .
■ When sawing lightweight construction materials,
follow the statutory regulations and all recom-
mendations from the material manufacturers .
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process .
Sanding
■ To prolong the service life of the sanding sheets,
ensure that you apply even pressure .
■ 6 │ GB │ IE

Assembly

Dust/chip extraction

Materials containing asbestos may not be
processed . Asbestos is a known carcinogen .
WARNING! RISK OF FIRE!
■ When working with electrical appliances that
can be connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk of fire!
In unfavourable conditions, e .g . when sparks
are flying while sanding metal or metal resi-
dues in wood, wood dust in the bag of the
vacuum cleaner can spontaneously ignite .
This is a particular risk if the wood dust is
mixed with paint residues or other chemicals
and the workpiece has become hot after
being worked for a long time . Therefore,
avoid overheating of the material being
sanded as well as the appliance . Always
empty the vacuum cleaner's dust bag before
taking work breaks .
■ Use only approved vacuum cleaners, such as:
B . a workshop vacuum cleaner .
Wear a dust mask!
■ Always use dust extraction .
■ Ensure that your workplace is adequately
ventilated .
■ Observe the regulations applicable in your
country regarding the materials to be worked .
Connecting a dust extraction unit
♦ Place the dust extraction unit
appliance and fix it into place on the appliance
with the screw .
♦ Fit the angle adapter
unit .
The angle adapter
180° .
under the
onto the dust extraction
can be turned by up to
PMFW 310 D2