Safety Guidelines For Battery Chargers; Working Procedures; Before Use; Attaching/Disconnecting The Battery Pack To/From The Appliance - Parkside PAMFW 20-Li A1 Betriebsanleitung

Safety guidelines for battery chargers

This appliance may be used by
■
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and know-
ledge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks. Do not
allow children to use the appliance
as a toy. Cleaning and user mainte-
nance tasks must not be carried out
by children unless they are super-
vised.
To avoid potential risks, damaged
■
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable for indoor use
only.
WARNING!
■ Do not operate the appliance with a dam-
aged cable, power cable or power plug.
A damaged power cable poses a threat of a
fatal electric shock.
│ GB │ IE
■ 20

Working procedures

Working principle:
The oscillating drive causes the application tool to
move back and forth at a speed of 5000–19000
times per minute. This allows for precision work
even in confined spaces.
Sawing/cutting:
■ Use only undamaged saw blades that are in
perfect working order. Bent, blunt or otherwise
damaged saw blades may break.
■ When sawing lightweight construction materi-
als, follow the statutory regulations and all rec-
ommendations from the material manufacturers.
■ Only soft materials such as wood, plasterboard
or similar should be processed using the plunge
saw process.
Sanding:
■ To prolong the service life of the sanding sheets
, ensure that you apply even pressure.

Before use

Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Push the battery pack
clicks into place.
Removing the battery pack:
♦ Press the release button
battery pack .

Checking the battery charge level

♦ Press the battery charge level button
check the status of the battery (see also main
diagram).
The status/remaining charge will be shown on
the battery display LED
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
into the handle until it
and remove the
to
as follows:
PAMFW 20-Li A1